- Quote Requests
Newcomb Spring is equipped to produce precision metal stampings and flat springs in small quantities from sheet material or etched blanks. For large, high-volume manufacturing runs, we typically utilize hard tooling. Newcomb often recommends that customers order a short run of stamping and flat spring parts to verify a component's functionality, thereby avoiding costly design errors.
The extensive variety of equipment we utilize to produce stampings, strip forms and flat springs, combined with our use of form tools, allows Newcomb Spring to create complex shapes as well as produce die sets that can be used for cutting, etching, extruding, notching, swedging, stamping and more. Our facilities also offer primary and secondary operation departments, which work to produce short-order flat form components of short-order flat forms.
Whenever possible, metal stampings and flat springs should be designed to bend against the grain of material (i.e. perpendicular to the grain) to improve life expectancy and reduce the risk of fracturing.
Newcomb Spring is capable of manufacturing parts using virtually any material, although we typically produce flat springs and metal stampings from continuous coil material. The most frequently chosen coil materials are #3 slit edge, #5 deburred edge and #1 round edge. The main differences among these options are:
As with all Newcomb Spring-produced parts, we can custom manufacture any metal stamping and flat spring to fit your needs. As a trusted stamping, flat spring and strip form manufacturer, we have offered great prices, high quality and total customer satisfaction for more than a century.
To experience the Newcomb Spring difference for yourself, contact us today, or request a metal stamping or strip form manufacturing quote online.
Fill out this form for a quick response from one of our representatives.
A Network of Newcomb Spring Facilities • Headquarters: 5408 Panola Industrial Blvd • Decatur, GA 30035
• 770-981-2803 • email@example.com • © Newcomb Spring Corp.